Snail Racing Propulsion System

Snail Racing Propulsion System.

More details

Rs. 8,100.00 tax excl.

Rs. 8,100.00 per System

1 item in stock

Warning: Last items in stock!

The Snail is a drone racing optimized propulsion system created to give racers the winning edge. It is fine tuned and precision engineers by DJI propulsion experts to bring new levels of power and maneuverability to the races.


  • Combined with the 5048S Tri-Blade Propeller, the Snail 2305 Motor delivers an incredible 1.32kg of thrust, 15% more than the market average. As light weight is critical to racing drones, yet they have to endure frequent collisions, extensive simulations and flight tests have been carried out to make the Snail 2305 Motor stronger while keeping weight to a slim 27.8g.


  • The Snail 430-R ESC uses a high performance 32 bit 100MHz MCU and unique race optimized control algorithms, allowing it to outperform similar products in both response and efficiency. Its ultra-compact hardware design allows it to sustain a continuous current as high as 30A, from a form that is just 3.6cm. It can be further fine tuned to meet racer needs using the ESC Programmer and DJI Assistant 2.

*Oneshot125 Support

46000rpm (7 pole-pairs) Max

30A Max Continuous Current


Max Thrust 1.32kg /rotor (16.8V, Sea Level)
Recommended Battery 4S LiPo
Recommended Takeoff Weight 125– 250g/rotor (Sea Level)
Operating Environment -10 to 50℃
Max Allowable Voltage 17.4V
Max Allowable Current (Continuous) 30A
Max Peak Current(3 sec) 45A
Supported Throttle Signal Modes Regular/OneShot125
Max OneShot125 Signal Frequency 1kHz
Max PWM Signal Frequency 500Hz
Default PWM Output Signal Frequency 16kHz
Weight (Without Cables) 2.8g
Supported Battery 3S – 4S LiPo
Stator Size 23×5mm
KV 2400rpm/V
Weight (Without Cables) 27.8g
Propellers( Diameter×Thread Pitch/Weight )  
5048S propellers 5×4.8inch (12.70×12.19cm)/ 5.50g
5024S propellers 5×2.4inch (12.70×6.1cm) /3.45g
6030S propellers 6×3.0inch (15.24×7.62cm)/3.20g
6048-3D propellers 6×4.8inch (15.24×12.19cm)/ 4.10g
5048 propellers 5×4.8inch (12.70×12.19cm) /5.68g
7027S propellers 7×2.7inch (17.78×6.86cm) /4.32g


  • 2x 2305 Motor (CCW)
  • 2x 2305 Motor (CW)
  • 4x 430-R ESC
  • 4x Heat-shrink Cover
  • Motor Screws (M3x5, M3x6)